Click the product type number for detailed information.
The image might be different from an actual product.
Servo Amplifier
SANMOTION R
RS AC200V Type


RS1A01
AC200V to 230V
Combination Servo Motors
Rated Output : 
0.03kW  to  0.3kW
Feature
Auto-tuning
The auto-tuning feature improves responsiveness through an inertia-identification function based on a new algorithm.
It allows five types of auto-tuning characteristics to be selected and 30 steps of responsiveness to be set, and it includes a parameter auto-save function.
Conforms to International Standards
Standard specifications of the SANMOTION R series of servoamplifiers comply with UL, CSA, and EN international standards. SANYO DENKI provides EMC filters to meet EMC directives and servo motors conforming to UL and EN international standards.
Test Operations (JOG Functions)
Built-in JOG functions can be used to check connections between the motor and amplifier, and testing can be performed without having to make connections to higherlevel equipment.
Harmonic Suppression
DC reactor connectors are provided for power harmonic suppression.
5-digit LED with Integrated Controls
Integrated controls make it easy to set and modify parameters on-site and to perform system monitoring and alarm tracing.
Internal Dynamic Brake
The internal dynamic brake provides emergency stop capability. Dynamic braking sequence parameters are open for configuration.
Internal Regenerative Resistor
An internal regenerative resistor (option) absorbs regenerative power during motor deceleration. An external regenerative resistor can be added if the capacity of the internal regenerative resistor is insufficient.
Setup Software
Make parameter settings, view graphic displays of motorposition, speed and torque waveforms, and perform system analysis with setup software.
Rapid Response
A 4th-order notch filter for reducing phase delay suppresses resonance in the mechanical system and improves speed-control responsiveness of the equipment.
Faster Positioning Stabilization
Adoption of a new algorithm significantly reduces the position stabilization time of the equipment.
Vibration Control
Feed-forward vibration suppression can control mechanical end-point vibration and equipment vibration through simple adjustments. Four types of frequencies can be selected for suppressing vibration.
Disturbance Control
A new disturbance-observer function suppresses the effects of other axes in a multi-axes configuration and expands the range of applicable frequencies.
High Resolution
Supports 20-bit encoding (1,048,576 divisions) enabling a high level of control fitting a high-resolution encoder.
Full-close Control
Supports full-close control using information from a linear scale and high-resolution encoder mounted on the load side (option).
Conserves 20% of Lost Power
A low-loss power module reduces power loss in the main circuit by 20%.

The image might be different from an actual product.
Servo Amplifier
SANMOTION R
RS AC200V Type


RS1A03
AC200V to 230V
Combination Servo Motors
Rated Output : 
0.4kW  to  0.75kW
Feature
Auto-tuning
The auto-tuning feature improves responsiveness through an inertia-identification function based on a new algorithm.
It allows five types of auto-tuning characteristics to be selected and 30 steps of responsiveness to be set, and it includes a parameter auto-save function.
Conforms to International Standards
Standard specifications of the SANMOTION R series of servoamplifiers comply with UL, CSA, and EN international standards. SANYO DENKI provides EMC filters to meet EMC directives and servo motors conforming to UL and EN international standards.
Test Operations (JOG Functions)
Built-in JOG functions can be used to check connections between the motor and amplifier, and testing can be performed without having to make connections to higherlevel equipment.
Harmonic Suppression
DC reactor connectors are provided for power harmonic suppression.
5-digit LED with Integrated Controls
Integrated controls make it easy to set and modify parameters on-site and to perform system monitoring and alarm tracing.
Internal Dynamic Brake
The internal dynamic brake provides emergency stop capability. Dynamic braking sequence parameters are open for configuration.
Internal Regenerative Resistor
An internal regenerative resistor (option) absorbs regenerative power during motor deceleration. An external regenerative resistor can be added if the capacity of the internal regenerative resistor is insufficient.
Setup Software
Make parameter settings, view graphic displays of motorposition, speed and torque waveforms, and perform system analysis with setup software.
Rapid Response
A 4th-order notch filter for reducing phase delay suppresses resonance in the mechanical system and improves speed-control responsiveness of the equipment.
Faster Positioning Stabilization
Adoption of a new algorithm significantly reduces the position stabilization time of the equipment.
Vibration Control
Feed-forward vibration suppression can control mechanical end-point vibration and equipment vibration through simple adjustments. Four types of frequencies can be selected for suppressing vibration.
Disturbance Control
A new disturbance-observer function suppresses the effects of other axes in a multi-axes configuration and expands the range of applicable frequencies.
High Resolution
Supports 20-bit encoding (1,048,576 divisions) enabling a high level of control fitting a high-resolution encoder.
Full-close Control
Supports full-close control using information from a linear scale and high-resolution encoder mounted on the load side (option).
Conserves 20% of Lost Power
A low-loss power module reduces power loss in the main circuit by 20%.

The image might be different from an actual product.
Servo Amplifier
SANMOTION R
RS AC200V Type


RS1A05
AC200V to 230V
Combination Servo Motors
Rated Output : 
0.75kW  to  1.5kW
Feature
Auto-tuning
The auto-tuning feature improves responsiveness through an inertia-identification function based on a new algorithm.
It allows five types of auto-tuning characteristics to be selected and 30 steps of responsiveness to be set, and it includes a parameter auto-save function.
Conforms to International Standards
Standard specifications of the SANMOTION R series of servoamplifiers comply with UL, CSA, and EN international standards. SANYO DENKI provides EMC filters to meet EMC directives and servo motors conforming to UL and EN international standards.
Test Operations (JOG Functions)
Built-in JOG functions can be used to check connections between the motor and amplifier, and testing can be performed without having to make connections to higherlevel equipment.
Harmonic Suppression
DC reactor connectors are provided for power harmonic suppression.
5-digit LED with Integrated Controls
Integrated controls make it easy to set and modify parameters on-site and to perform system monitoring and alarm tracing.
Internal Dynamic Brake
The internal dynamic brake provides emergency stop capability. Dynamic braking sequence parameters are open for configuration.
Internal Regenerative Resistor
An internal regenerative resistor (option) absorbs regenerative power during motor deceleration. An external regenerative resistor can be added if the capacity of the internal regenerative resistor is insufficient.
Setup Software
Make parameter settings, view graphic displays of motorposition, speed and torque waveforms, and perform system analysis with setup software.
Rapid Response
A 4th-order notch filter for reducing phase delay suppresses resonance in the mechanical system and improves speed-control responsiveness of the equipment.
Faster Positioning Stabilization
Adoption of a new algorithm significantly reduces the position stabilization time of the equipment.
Vibration Control
Feed-forward vibration suppression can control mechanical end-point vibration and equipment vibration through simple adjustments. Four types of frequencies can be selected for suppressing vibration.
Disturbance Control
A new disturbance-observer function suppresses the effects of other axes in a multi-axes configuration and expands the range of applicable frequencies.
High Resolution
Supports 20-bit encoding (1,048,576 divisions) enabling a high level of control fitting a high-resolution encoder.
Full-close Control
Supports full-close control using information from a linear scale and high-resolution encoder mounted on the load side (option).
Conserves 20% of Lost Power
A low-loss power module reduces power loss in the main circuit by 20%.

The image might be different from an actual product.
Servo Amplifier
SANMOTION R
RS AC200V Type


RS1A10
AC200V to 230V
Combination Servo Motors
Rated Output : 
2kW  to  3kW
Feature
Auto-tuning
The auto-tuning feature improves responsiveness through an inertia-identification function based on a new algorithm.
It allows five types of auto-tuning characteristics to be selected and 30 steps of responsiveness to be set, and it includes a parameter auto-save function.
Conforms to International Standards
Standard specifications of the SANMOTION R series of servoamplifiers comply with UL, CSA, and EN international standards. SANYO DENKI provides EMC filters to meet EMC directives and servo motors conforming to UL and EN international standards.
Test Operations (JOG Functions)
Built-in JOG functions can be used to check connections between the motor and amplifier, and testing can be performed without having to make connections to higherlevel equipment.
Harmonic Suppression
DC reactor connectors are provided for power harmonic suppression.
5-digit LED with Integrated Controls
Integrated controls make it easy to set and modify parameters on-site and to perform system monitoring and alarm tracing.
Internal Dynamic Brake
The internal dynamic brake provides emergency stop capability. Dynamic braking sequence parameters are open for configuration.
Internal Regenerative Resistor
An internal regenerative resistor (option) absorbs regenerative power during motor deceleration. An external regenerative resistor can be added if the capacity of the internal regenerative resistor is insufficient.
Setup Software
Make parameter settings, view graphic displays of motorposition, speed and torque waveforms, and perform system analysis with setup software.
Rapid Response
A 4th-order notch filter for reducing phase delay suppresses resonance in the mechanical system and improves speed-control responsiveness of the equipment.
Faster Positioning Stabilization
Adoption of a new algorithm significantly reduces the position stabilization time of the equipment.
Vibration Control
Feed-forward vibration suppression can control mechanical end-point vibration and equipment vibration through simple adjustments. Four types of frequencies can be selected for suppressing vibration.
Disturbance Control
A new disturbance-observer function suppresses the effects of other axes in a multi-axes configuration and expands the range of applicable frequencies.
High Resolution
Supports 20-bit encoding (1,048,576 divisions) enabling a high level of control fitting a high-resolution encoder.
Full-close Control
Supports full-close control using information from a linear scale and high-resolution encoder mounted on the load side (option).
Conserves 20% of Lost Power
A low-loss power module reduces power loss in the main circuit by 20%.

The image might be different from an actual product.
Servo Amplifier
SANMOTION R
RS AC200V Type


RS1A15
AC200V to 230V
Combination Servo Motors
Rated Output : 
3.5kW  to  7kW
Feature
Auto-tuning
The auto-tuning feature improves responsiveness through an inertia-identification function based on a new algorithm.
It allows five types of auto-tuning characteristics to be selected and 30 steps of responsiveness to be set, and it includes a parameter auto-save function.
Conforms to International Standards
Standard specifications of the SANMOTION R series of servoamplifiers comply with UL, CSA, and EN international standards. SANYO DENKI provides EMC filters to meet EMC directives and servo motors conforming to UL and EN international standards.
Test Operations (JOG Functions)
Built-in JOG functions can be used to check connections between the motor and amplifier, and testing can be performed without having to make connections to higherlevel equipment.
Harmonic Suppression
DC reactor connectors are provided for power harmonic suppression.
5-digit LED with Integrated Controls
Integrated controls make it easy to set and modify parameters on-site and to perform system monitoring and alarm tracing.
Internal Dynamic Brake
The internal dynamic brake provides emergency stop capability. Dynamic braking sequence parameters are open for configuration.
Internal Regenerative Resistor
An internal regenerative resistor (option) absorbs regenerative power during motor deceleration. An external regenerative resistor can be added if the capacity of the internal regenerative resistor is insufficient.
Setup Software
Make parameter settings, view graphic displays of motorposition, speed and torque waveforms, and perform system analysis with setup software.
Rapid Response
A 4th-order notch filter for reducing phase delay suppresses resonance in the mechanical system and improves speed-control responsiveness of the equipment.
Faster Positioning Stabilization
Adoption of a new algorithm significantly reduces the position stabilization time of the equipment.
Vibration Control
Feed-forward vibration suppression can control mechanical end-point vibration and equipment vibration through simple adjustments. Four types of frequencies can be selected for suppressing vibration.
Disturbance Control
A new disturbance-observer function suppresses the effects of other axes in a multi-axes configuration and expands the range of applicable frequencies.
High Resolution
Supports 20-bit encoding (1,048,576 divisions) enabling a high level of control fitting a high-resolution encoder.
Full-close Control
Supports full-close control using information from a linear scale and high-resolution encoder mounted on the load side (option).
Conserves 20% of Lost Power
A low-loss power module reduces power loss in the main circuit by 20%.

The image might be different from an actual product.
Servo Amplifier
SANMOTION R
RS AC200V Type


RS1A30
AC200V to 230V
Combination Servo Motors
Rated Output : 
5.5kW  to  15kW
Feature
Auto-tuning
The auto-tuning feature improves responsiveness through an inertia-identification function based on a new algorithm.
It allows five types of auto-tuning characteristics to be selected and 30 steps of responsiveness to be set, and it includes a parameter auto-save function.
Conforms to International Standards
Standard specifications of the SANMOTION R series of servoamplifiers comply with UL, CSA, and EN international standards. SANYO DENKI provides EMC filters to meet EMC directives and servo motors conforming to UL and EN international standards.
Test Operations (JOG Functions)
Built-in JOG functions can be used to check connections between the motor and amplifier, and testing can be performed without having to make connections to higherlevel equipment.
Harmonic Suppression
DC reactor connectors are provided for power harmonic suppression.
5-digit LED with Integrated Controls
Integrated controls make it easy to set and modify parameters on-site and to perform system monitoring and alarm tracing.
Internal Dynamic Brake
The internal dynamic brake provides emergency stop capability. Dynamic braking sequence parameters are open for configuration.
Internal Regenerative Resistor
An internal regenerative resistor (option) absorbs regenerative power during motor deceleration. An external regenerative resistor can be added if the capacity of the internal regenerative resistor is insufficient.
Setup Software
Make parameter settings, view graphic displays of motorposition, speed and torque waveforms, and perform system analysis with setup software.
Rapid Response
A 4th-order notch filter for reducing phase delay suppresses resonance in the mechanical system and improves speed-control responsiveness of the equipment.
Faster Positioning Stabilization
Adoption of a new algorithm significantly reduces the position stabilization time of the equipment.
Vibration Control
Feed-forward vibration suppression can control mechanical end-point vibration and equipment vibration through simple adjustments. Four types of frequencies can be selected for suppressing vibration.
Disturbance Control
A new disturbance-observer function suppresses the effects of other axes in a multi-axes configuration and expands the range of applicable frequencies.
High Resolution
Supports 20-bit encoding (1,048,576 divisions) enabling a high level of control fitting a high-resolution encoder.
Full-close Control
Supports full-close control using information from a linear scale and high-resolution encoder mounted on the load side (option).
Conserves 20% of Lost Power
A low-loss power module reduces power loss in the main circuit by 20%.

The image might be different from an actual product.
Servo Amplifier
SANMOTION R
RS AC100V Type


RS1E01
AC100V to 115V
Combination Servo Motors
Rated Output : 
0.03kW  to  0.1kW
Feature
Auto-tuning
The auto-tuning feature improves responsiveness through an inertia-identification function based on a new algorithm.
It allows five types of auto-tuning characteristics to be selected and 30 steps of responsiveness to be set, and it includes a parameter auto-save function.
Conforms to International Standards
Standard specifications of the SANMOTION R series of servoamplifiers comply with UL, CSA, and EN international standards. SANYO DENKI provides EMC filters to meet EMC directives and servo motors conforming to UL and EN international standards.
Test Operations (JOG Functions)
Built-in JOG functions can be used to check connections between the motor and amplifier, and testing can be performed without having to make connections to higherlevel equipment.
Harmonic Suppression
DC reactor connectors are provided for power harmonic suppression.
5-digit LED with Integrated Controls
Integrated controls make it easy to set and modify parameters on-site and to perform system monitoring and alarm tracing.
Internal Dynamic Brake
The internal dynamic brake provides emergency stop capability. Dynamic braking sequence parameters are open for configuration.
Internal Regenerative Resistor
An internal regenerative resistor (option) absorbs regenerative power during motor deceleration. An external regenerative resistor can be added if the capacity of the internal regenerative resistor is insufficient.
Setup Software
Make parameter settings, view graphic displays of motorposition, speed and torque waveforms, and perform system analysis with setup software.
Rapid Response
A 4th-order notch filter for reducing phase delay suppresses resonance in the mechanical system and improves speed-control responsiveness of the equipment.
Faster Positioning Stabilization
Adoption of a new algorithm significantly reduces the position stabilization time of the equipment.
Vibration Control
Feed-forward vibration suppression can control mechanical end-point vibration and equipment vibration through simple adjustments. Four types of frequencies can be selected for suppressing vibration.
Disturbance Control
A new disturbance-observer function suppresses the effects of other axes in a multi-axes configuration and expands the range of applicable frequencies.
High Resolution
Supports 20-bit encoding (1,048,576 divisions) enabling a high level of control fitting a high-resolution encoder.
Full-close Control
Supports full-close control using information from a linear scale and high-resolution encoder mounted on the load side (option).
Conserves 20% of Lost Power
A low-loss power module reduces power loss in the main circuit by 20%.

The image might be different from an actual product.
Servo Amplifier
SANMOTION R
RS AC100V Type


RS1E03
AC100V to 115V
Combination Servo Motors
Rated Output : 
0.2kW  to  0.2kW
Feature
Auto-tuning
The auto-tuning feature improves responsiveness through an inertia-identification function based on a new algorithm.
It allows five types of auto-tuning characteristics to be selected and 30 steps of responsiveness to be set, and it includes a parameter auto-save function.
Conforms to International Standards
Standard specifications of the SANMOTION R series of servoamplifiers comply with UL, CSA, and EN international standards. SANYO DENKI provides EMC filters to meet EMC directives and servo motors conforming to UL and EN international standards.
Test Operations (JOG Functions)
Built-in JOG functions can be used to check connections between the motor and amplifier, and testing can be performed without having to make connections to higherlevel equipment.
Harmonic Suppression
DC reactor connectors are provided for power harmonic suppression.
5-digit LED with Integrated Controls
Integrated controls make it easy to set and modify parameters on-site and to perform system monitoring and alarm tracing.
Internal Dynamic Brake
The internal dynamic brake provides emergency stop capability. Dynamic braking sequence parameters are open for configuration.
Internal Regenerative Resistor
An internal regenerative resistor (option) absorbs regenerative power during motor deceleration. An external regenerative resistor can be added if the capacity of the internal regenerative resistor is insufficient.
Setup Software
Make parameter settings, view graphic displays of motorposition, speed and torque waveforms, and perform system analysis with setup software.
Rapid Response
A 4th-order notch filter for reducing phase delay suppresses resonance in the mechanical system and improves speed-control responsiveness of the equipment.
Faster Positioning Stabilization
Adoption of a new algorithm significantly reduces the position stabilization time of the equipment.
Vibration Control
Feed-forward vibration suppression can control mechanical end-point vibration and equipment vibration through simple adjustments. Four types of frequencies can be selected for suppressing vibration.
Disturbance Control
A new disturbance-observer function suppresses the effects of other axes in a multi-axes configuration and expands the range of applicable frequencies.
High Resolution
Supports 20-bit encoding (1,048,576 divisions) enabling a high level of control fitting a high-resolution encoder.
Full-close Control
Supports full-close control using information from a linear scale and high-resolution encoder mounted on the load side (option).
Conserves 20% of Lost Power
A low-loss power module reduces power loss in the main circuit by 20%.